A diferença entre Tapping parafusos e ordinário parafusos é que ordinário parafusos deve ter processado parafuso furos antes eles podem ser parafusados em. Tapping parafusos são não obrigatórios, você pode tap eles você pode tocá-los você pode tocá-los enquanto parafusos em. In order to alcançar o propósito de auto-toque, this kind of hexagonal drill tail screw usually has a pointed tip to facilitate the squeeze into the object to be screwed in.
1. Tapping screws are screws with a drill bit. Hexagon socket bolts are constructed with special electric tools. Drilling, tapping, fixing, and locking are completed at one time. Tapping screws are mainly used for connecting and fixing some thinner plate parts, such as the connection between color steel plates and color steel plates, the connection between color steel plates and purlins, wall beams, etc. Their penetration capacity generally does not exceed 6mm, and the maximum does not exceed 12mm.
2. Tapping screws are often exposed outdoors and have strong corrosion resistance; their rubber sealing rings can ensure that the screws do not seep water and have good corrosion resistance.
3. Tapping screws are suitable for use with wooden materials, which are what we often call wood screws. It is generally operated manualmente. Due to manpower limitations, such screws are geralmente very small and have a narrow range of use.
4. Tapping screws combine taps and bolts. The front is the tap and the back is the thread. On geralmente softer materials, you can drill a hole and screw it in directly. The thread is tapped by the tap, and then the bolt thread is tightened. If the screw diameter is smaller, the material is also very soft. You can even escrew it into wood without drilling holes first.
5. Tapping screws are usually described by three parameters: screw diameter series, number of threads per inch and screw length. There are two types of screw diameter grades: 10 and 12, whose corresponding screw diameters are 4.87mm and 5.43mm respectivamente; the number of threads per inch is available in three grades: 14, 16, and 24. The more threads per inch, the higher the screw diameter. The mais forte a perfuração habilidade.